PV Solar Mounting System:
1. Installation Location: Tile roof.
2. Wind Load: 55 m/s.
3. Snow Load: 1.5 KN/㎡.
4. Solar Module: Framed or thin film.
5. Module Alignment: Horizontal or vertical.
6. Module Dimension: Any dimension.
7. Standard: AS1170.2-2002,DIN1055, DIN EN 10326-2004, DIN EN 10025, DIN/ISO 898.
8. Warranty: 10 years.
Advantage:
1. Compatible to all kinds of tile roofs in different regions.
2. Easy to install with simple hardware tools.
3. Precise dimension of rack to avoid the on-site cutting or welding.
4. Compliant to design standards of Europe, Australia and United States.
⊙ to reduce heat conduction: the insulation broken bridge aluminum alloy profile, its thermal conductivity is 1.8 ~ 3.5W/m2 · k is much lower than ordinary aluminum
Profiles 140 170W/m2 · k; hollow glass structure, the thermal conductivity of 6.69 ~ 2.0 ~ 3.59W/m2 · k is much lower than ordinary aluminum extrusions 6.84W/m2 · k, effectively reducing the heat conduction through aluminium doors windows .
The ⊙ prevent condensation: with insulation surface temperature profiles within the indoor temperature close to reduce indoor moisture due to saturation and the possibility of condensation in the surface profile.
The ⊙ energy conservation: in the winter, with insulation, window frames to reduce 1/3 of the heat loss through the window frames; in the summer, in the case of air-conditioned, with insulated window frames can be more more to reduce energy loss
⊙ protection of the environment: through the application of the insulation system can reduce energy consumption, while reducing the environmental radiation due to air conditioning and heating.
⊙ is good for health: the human and environmental heat exchange depends on the indoor air temperature, air flow speed and the outdoor air temperature. By adjusting the doors and windows of the indoor temperature, so that not less than 12 ~ 13 ° C, the most comfortable environment. ⊙ reduce noise: the different thickness of the insulating glass structure and insulation broken bridge aluminum cavity structure can effectively reduce the effects of acoustic resonance, preventing the transmission of voice, can reduce the noise 30dB more.
⊙ and rich colors: anodized, powder coating, fluorocarbon coating surface treatment can produce different colors of aluminum, after rolling combination, so that the insulation of aluminum alloy doors and windows to produce indoor and outdoor color aluminium doors windows.
Comments Off
1. Good appearance, light in weight， strong decorative sense
2. To use European general hardware， convenience in installation；
3. Good performance in air tightness， water proof and safety， effectively insulating sound and heat；
4. Assembly angle piece in uniform size
5. Center mullion use special connecting piece
PV Solar Mounting System:
1. Installation Location: Tile roof.
2. Wind Load: 55 m/s.
3. Snow Load: 1.5 KN/㎡.
4. Solar Module: Framed or thin film.
5. Module Alignment: Horizontal or vertical.
6. Module Dimension: Any dimension.
7. Standard: AS1170.2-2002,DIN1055, DIN EN 10326-2004, DIN EN 10025, DIN/ISO 898.
8. Warranty: 10 years.
Advantage:
1. Compatible to all kinds of tile roofs in different regions.
2. Easy to install with simple hardware tools.
3. Precise dimension of rack to avoid the on-site cutting or welding.
4. Compliant to design standards of Europe, Australia and United States.
60 Series Tilt & Turn Window
1. Excellent appearance with smooth shape, reasonable structure;
2. To use European general hardware, convenience in installation;
3. Good performance in air tightness, water proof and safety， effectively insulating sound and heat;
4. By Using steel piece to level up inner sash, increase the strength of frame and sash, avoid the plane jump
868 series sliding window
1.Inner sash superposition materials are designed with handles and on a double-hollow basis. And window structure is even firmer by virtue of the design of windproof superposition；
2. Tough,durable and luxury crescent-shape window locks uniquely manufactured by Fen An company are adopted to naturally obstruct the noise of wind；
3. The structure of high / low double reflux troughs is adopted to create high fall between internal and external water levels；
4. The inner frame closely sticks to the lower horizontal airtight adhesive tape of the outer frame；
5. Specially assembly include Lock bumper， Burglar alarm， Crescen lock， Double felt strips， Multifunctional drain hole， Waterproof shim， with multi-protection.
96 Series Sliding Door Sliding Aluminium Doors
1. Excellent appearance with smooth shape
2. Outer frame connect squarely， inner sash splice joint in 45°， with using angle patch to increase the corner joint.
3. Simple section design can achieve different door type；
4. Wider track design with bigger pulley strengthen the carrying capacity；
5. Seal picece adopt stripe joint in uniform size
6. Selective locks
Solar Panel Frame FIL7477
Solar Panel Frame: It is aluminum frame to fix the PV solar cell panel assembly.
Usage: To fix and seal the solar cell panel assembly, enhance the assembly, prolong the working life; easy to transport and installation.
Material: 6063 T5 Aluminum Alloy
Frame Finish: Natural Anodized or Electrophoresis
Size: As per clients’ demand
Aluminium was the main material used for the creation of windows. Aluminium windows are basically having the case or frame made up of aluminium profile. These are among the popular windows, which are mainly used for workplaces, industries and other buildings.There are many advantages of choosing these windows over the other materials. The metal has strength and the ratio is good, when the strength is compared with weight of material. This makes the aluminium windows to be designed in many customized shapes. It is needed for fulfilling the necessities of the people looking for a specified look in building design. They also have a good resistivity for moisture as well as storms.
There are many advantages of using aluminium metal for windows, but there are a few drawbacks for them as well. These windows are not recommended for protection against extreme weather conditions, like too hot or cold weather. People do not recommend Sliding Aluminium Windows for this very reason. Still, due to many advantages, these windows are preferred over the windows of other materials.
There are also many other advantages of aluminium windows. They have the capability of controlling noise and hence, it is used at the places requiring silence. These are best suitable for schools, colleges and other places. They require least maintenance and can give perfect durability. You will not have to worry about the performance issues in case of dealing with these aluminium doors windows.
Aluminium windows are still used for the reason of its durability as well as robustness. It also offers folding of the panels of the window for getting exposure to the outside atmosphere. These windows are mainly used for the designing of the large windows. They are matched with the Sliding Aluminium Doors of the commercial rooms. Furthermore, they are placed on outdoor parts of the house or other places. Presently, there are many decorative windows available made up of aluminium metal. The hinges for these windows are designed in such a way that they give support to the glass or other materials present in it. Many companies in Florida give discount rates on these aluminium windows. They offer many versatile benefits, but have many disadvantages too.
Comments Off
898 Series Sliding Window
1. In good appearance with clear edges and corners；
2. Higher fall design for slider sill， easy to drain， reinforce the water tightness
3. High-low design in bottom impede the wind pressure channels effectively
4. Seal piece adopt seal stripe joint in uniform size
5. Particular water-proof design in edge seal cover reduce the water infiltration in significance；
6. Achieving installation and disassembly indoor
